Home Company Products Installation & Service Testimonials Contact Us
Home Products Contact

Overview – Platform Lifts

Axess4All supply and install the Cibes S300, B1000, A3000,A4000 home lift, A5000, A7000 and A8000 platform lifts for both commercial and domestic markets Also we now have the A9000 Cabin lift . All our products meet most site applications for internal and external installation and have a variety of features and finishes to meet the most demanding aesthetic requirements. Please contact us for Brochure’s on our full product ranges.

  • Suitable for New Build and refurbishment contracts
  • Platform size complies with Part M of the building regulations.
  • A pit is not required as we provide a small ramp at the lower level however it is desirable to have a 50mm deep pit recess if at all possible.
  • No motor room required as the drive and controller are positioned within the footprint of the unit structure enclosure.
  • Only headroom of 2500mm required from finished floor level at the top floor served to the top of the lift.
  • Small footprint from 1600mm deep x 1500mm wide subject to site type and specification requirements.
  • High aesthetic appeal.

Applications on our best selling and most popular ranges

The A5000 A7000 and A8000 can travel in excess of 9m and have up to six entrances, all subject to the application and volume of traffic. Axess4All customer base is typically.

  • Hospitals
  • Schools & Colleges
  • Offices
  • Private residences
  • Nursing homes
  • Museums, Art Galleries
  • Organisations for the disabled
  • Shops
  • Restaurants
  • Community Centres
  • Creche and Childcare establishments

Entrance Configurations

Entrances can be positioned on any of three sides at any one time, one side must always be available for the drive machinery. The lift is generally free standing up to around 3m travel, only requiring fixing for lateral stability. Units over 3m travel require additional fixings. Once the platform lift is installed there is very little load applied to the walls or fabric of the building.


As you will see from the selection of photographs there are numerous options to enhance and make the installation fit in with the buildings specific décor.

  • The entire unit can be Powder Coat painted to any RAL colour.
  • The shaft can be fully or part glazed.
  • 4 styles of Aluminium glass panel and steel panel doors

Platform Lift features

  • Power operated doors
  • Special locking systems by key or smart card to restrict to specific users.
  • Fold down seat on the platform.
  • Battery operated emergency lowering facility in case of mains power failure
  • Telephone and auto – dial communication systems
  • Voice synthesiser
  • Infra red (IR) control
  • Lift arrival gongs
  • Automatic shaft lighting.

A7000 Platform Lift

The A7000 has all the same features as the A5000 plus a 2.2m high vertical fascia with integrated control panel, aesthetically designed overhead light fitting and side mirror. The control panel is made of natural anodised aluminium as standards. Optional surface coatings are available in birch, beech, alder tree and white marble.

Technical Specification A5000/7000

Rated load: 400kg

Rated Speed: 9m/min (0.15m/s)

Lifting Height: up to 9m (6 Landings)

Platform Dimensions: 1500L x 1000W / 1500l x 1100W (To part M)

Footprint Dimensions: 1600 x 1400 / 1600 x 1500

Shaft: Steel panels pre-painted off white RAL9016

Doors: Steel hinged doors or gates / Steel door fronts painted off white RAL9016 / Aluminium door fronts made in natural anodised Aluminium.

Door measurements: 2000mm high x 900mm wide

Gate measurements: 1100mm high x 900mm wide

Control System: Micro computer based control system

Power supply: 230volt single phase variable frequency convertor

Motor Power: 2.2 kw

Fault alarm: A potential free contact can be connected to central alarm units, reception etc.

A8000 Platform lift

As many of above but with a larger size platform

Platform Dimensions from: Standard platform size 1405 x 1980 mm (w x d).

  • Variable platform widths 1005 – 1405 mm.
  • Variable platform depths 1480 – 2480 mm.

Rated load: 1000kg

Power supply: 400volt 3phase 16amp

Motor Power: 4 kw

Pit depth: 200mm

S300 and the BC Wheelchair Stairlifts

The S300 and BC wheelchair stair lift is designed for wheelchair users and less mobile persons. The lift is convenient and easy to operate, folds and parks and includes a wide range of built in safety features. It is ideal for commercial and public buildings with wide staircases, but would not be very suitable in most private residences due to the narrow stair width.

The lift can be used for straight internal and external staircases and can be fitted to a side wall or to floor stanchions. Users can operate the lift independently, as the barrier arms and ramps are power operated. The lift can be folded and parked when not in use measuring only 285mm from the wall, allowing access to the staircase. Users can call the lift, even when parked.